Bar Top Preparation

1 05 2012

Through the process of planning and dreaming up the bar, I found that the design is really only limited by your imagination.  So when it came to figuring out what to do for a counter top, I was pleased to find out that expense wise, there were lots of options to choose from.  I initially thought that regular old kitchen counter tops were going to be the easiest, and cheapest.  It turns out that while this might be a simple solution, the look can leave much to be desired.  When learning that something like using hardwood flooring was not really any more expensive than laminate counters, we decided to go that route.

You can see pictures from the previous post, but the bar has a dark finish to it.  So I figured I’d contrast the dark with a brighter stain for the top.  I bought unfinished oak hardwood flooring from Menards, and stained it with Minwax Natural wood finish.  We are going to assemble the “flooring” in a sort of zigzag fashion to give the top some character.

Once the top is assembled and in place, we’ll seal it up with an epoxy designed for table tops.  This will finish off the top with the equivalent of about 50 coats of polyurethane and will make a nearly indestructible finish.  The trim around the edge of the top will allow for the hard wood flooring and then a 3/16 inch layer of the epoxy.  (Here is a YouTube video of what this will entail).

The hardwood flooring that will become my bartop. Sanded, stained, and sitting in my garage.

Advertisements

Actions

Information

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: